How to use the Boundary Strips to block off RoboVac?
For RoboVacs that work with boundary strips (Which RoboVacs work with boundary strips ), you can apply the boundary strips on flat surfaces to block off your RoboVac.
The boundary strips need to be taped down. They come with double-sided tapes.
Below are recommended steps:
1. Measure the length of the strip you might need.
2. Cut the boundary strip vertically.
3. Stick the 3M adhesive tape on the boundary strip.
4. Apply the strip on the hard and flat floor. The side with the "eufy" logo should face upward.
The boundary strips need to be taped down. They come with double-sided tapes.
Below are recommended steps:
1. Measure the length of the strip you might need.
2. Cut the boundary strip vertically.
3. Stick the 3M adhesive tape on the boundary strip.
4. Apply the strip on the hard and flat floor. The side with the "eufy" logo should face upward.
How to use the Boundary Strips to block off RoboVac?
Download
Applicable for those products :
Resolved
Unresolved
Copied
0 Results
Support Videos
