Please refer to the following common questions regarding the integrated solar panel on the Solar Wall Light Cam S120.

 

❓:  Why does the solar panel sometimes not charge the Wall Light Cam?

💡: There are several reasons why a solar panel might not charge the Wall Light Cam.

 

1. Battery Protection Mechanism 

The S120 Solar Wall Light Cam can be charged up to 96% at most during solar charging. The device will start charging again once the power drops below 90%.

 

2. Charging Temperature Limit

The S120 Solar Wall Light Cam can charge via solar energy within the temperature range of 0°C to 40°C (32°F to 104°F).

 

 

3. Solar Panel Obstruction

If the panel becomes blocked or covered, it can affect the absorption of solar energy, resulting in poor charging performance.

 

4. Weather

Rainy or cloudy weather can affect the availability of solar energy, resulting in poor charging performance.

 

5. Equipment Malfunction

If the solar panel malfunctions, it can affect charging performance.

 

To ensure optimal charging performance, it is recommended to regularly clean the solar panel, check the weather conditions, and manually recharge the camera if necessary.

 

❓: Does the Wall Light Cam support external solar panels?

💡: Yes, the S120 Solar Wall Light Cam supports both the built-in solar panel and external solar panels. If the location of your Wall Light Cam does not have adequate sunlight, you can purchase an external eufy solar panel. Please note that using an external eufy solar panel will require the use of an adapter cable and only eufy solar panels may be used.

 

❓: How does the built-in solar panel work?

💡: To maximize the charging efficiency of the built-in solar panel, please try to choose a location where the solar panel will receive maximum sunlight. Make sure that the solar panel is fully exposed to direct sunlight for at least two hours on a daily basis for consistent charging.

 

❓: How to find the best installation location?

💡: The best places to install the Wall Light Cam include the following locations:

1. On a wall without eaves.

2. On a pole or fence where sunlight is not blocked.

 

Please avoid installing the Wall Light Cam in the following locations:

1. Indoor or under a porch.

2. Under or on trees.

3. Under slanted eaves.

If you have any other questions, please don't hesitate to reach out to us for further assistance.