Currently, we only support connecting two Solarbank E1600 units to an MI80 microinverter in order to have them work together. Other microinverters are not supported yet.

Note the following when wiring: Always connect two Solarbank E1600 units to both input ports of the same MI80 microinverter, but do not connect the output port of one Solarbank unit to the input port of the other Solarbank unit.

After turning on both Solarbank units, follow the instructions in the Anker app to add the first Solarbank unit on the "Device" screen, and then bind it to the MI80 microinverter to finish establishing the Homessytem. Next, on the "Device" screen, add the other Solarbank unit and bind it to the same microinverter. Finally, go to the "Homesystem" page of the first Solarbank unit, tap the plus sign ("+") in the upper right corner, and select "Add a device" to add the other Solarbank unit to the Homesystem.

The Homesystem controls the power in terms of the overall system, where you should note that:

1. You can only set the total output power of the two Solarbank E1600 units to 0 W, but cannot set one of them to 0 W and not set the other to 0 W.

2. When the total output power is not 0 W, by default, both Solarbank E1600 units distribute the power equally according to the set power. You can also set the output power of each Solarbank E1600 unit in "Advanced settings" as needed, and their output power values can be different.

3. When the Wi-Fi connections between both Solarbank E1600 units and the MI80 microinverter are normal, if one of the units has reached the minimum power and cannot supply power, the other unit will continue to supply power to the household.