Details
Related Articles
Support Videos
Introducing the Self-Cleaning and Self-Drying Functions for the MACH V1 Series

Self-Cleaning and Self-Drying

 

After you have finished cleaning and returned the MACH vacuum cleaner to its charging base, simply press the self-cleaning button one time in order for the vacuum to automatically begin cleaning and drying its roller brush.

Please refer to the following instructions:

  1. Place the MACH vacuum cleaner back onto its charging base.

  • Make sure the vacuum's clean water tank has more than 50% water volume prior to starting the self-cleaning process.
  1. Press the self-cleaning button on the vacuum one time in order for the vacuum to automatically begin cleaning and drying its roller brush.

  • For optimal cleaning results, it is recommended to turn on the floor cleaner switch before the vacuum starts its self-cleaning process.

  1. When the roller brush starts its self-drying process, the vacuum cleaner will emit a voice prompt to remind you to clean the dirty water tank.
 

How to Dry the Roller Brush

 

If only the roller brush needs to be dried, simply press and hold the trigger button for two seconds when the MACH vacuum cleaner is placed on the charging base.

The vacuum cleaner will automatically start the process of drying its roller brush.

 

If you have any further questions, please contact us for assistance.

Introducing the Self-Cleaning and Self-Drying Functions for the MACH V1 Series
Download
Applicable for those products :
Resolved
Unresolved
Copied
0 Results
Support Videos