Notes for use when the EverFrost Powered Cooler 30/40/50 arrives
Notes:
- After the cooler is delivered to the user, leave it for 24 hours before use.
- The cooler will stop working if the tilt angle exceeds 30 degrees. Place it horizontally, and it will resume normal operation in 5 minutes.
- Reminder to Close Doors: The buzzer will send a reminder if the cooler's cover is open for at most 180 seconds.
- The cooler must be disconnected from the main power supply when removing the battery.
If you have any questions, please contact us for further assistance.


16 undefined
Payments & Vouchers FAQ 1978 views 1 likes/2025-12-29 17:34:13
Introduction to Anker EverFrost Powered Cooler 30/40/50 6506 views 1 likes/2025-04-07 17:54:52
How to power Anker EverFrost Powered Cooler 30/40/50 with or without the battery? 3762 views 1 likes/2025-04-07 17:54:10
Which Anker power stations and solar panels are recommended to recharge the EverFrost Powered Cooler 30/40/50? 2474 views 1 likes/2025-04-07 17:54:10
How to connect the EverFrost Powered Cooler 30/40/50 to the Anker APP? 2453 views 1 likes/2025-04-07 17:54:10
Warranty for Anker EverFrost Powered Cooler 30/40/50 1530 views 1 likes/2025-04-07 17:54:10
What accessories come with Anker EverFrost Powered Cooler 30? 1624 views 1 likes/2025-04-07 17:54:10
The time needed to recharge the removable 299Wh battery fully via the XT-60 port or USB C port 1758 views 1 likes/2025-04-07 17:54:10
What is the operating temperature of the coolers 30/40/50? How do I set the temperature? 1780 views 1 likes/2025-04-07 17:54:10
Notes for use when the EverFrost Powered Cooler 30/40/50 arrives 1176 views 1 likes/2025-04-07 17:54:10
