Anker Desktop USB-C Hub (VALORANT Limited Edition)
Anker Desktop USB-C Hub (VALORANT Limited Edition)
Specification
1*PD in: up to 100W;PD out for laptop:80W
1*HDMI:HDMI 2.1 output for connecting an HDMI-enabled display. Supports resolutions up to 4K and refresh rates up to 240 Hz.
1*DP: DP 1.4 output for connecting a DisplayPort-enabled display. Supports resolutions up to 4K and refresh rates up to 240 Hz.
2*USB A Data port: 5Gbps
1*USB A Data port: 10Gbps
1*USB C Data port: 10 Gbps
1*SD 3.0 Card Slot (104MB/s)
1*microSD/TF 3.0 Card Slot (104MB/s)
Built-in cable length:2.3ft
Compatibility
1. Laptop's USB-C Requirements: For full compatibility, your laptop's USB-C port must support DP Alt Mode (for display output) and Power Delivery (for charging).
2. Laptop's System Support: Windows 10 or later, macOS 14 or later, ChromeOS
Display
1. USB-C Monitors Not Supported: The Front USB-C data port supports data transfer only. They do not support output video or connect to USB-C monitors.
2. Windows Multi-Display Support: Check if your Windows PC supports multiple displays by going to Intel Control Center > Processor to see the maximum number of supported displays.
3. MacOS Mirror Displays: Due to macOS limitation, all external monitors mirror the same screen.
Charging
1. Slow Charging: Some laptops use proprietary charging protocols and may display a "slow charging" warning when using non-original chargers.
If your laptop requires 85W or less, the hub will charge it at the same speed as the original adapter.
2. Downstream Ports Not Charging Devices: The downstream USB-A and USB-C ports support data transfer and provide standard power for device operation, but do not support device charging.
3. PD-IN port:The PD-IN port in the rear supports power input only. It draws 15W-20W power from connected PD wall charger to power the hub and the host laptop.
0 undefined