When the charging station is connected to a power source, the screen display will automatically switch to the main page, showing the total output of the USB ports.

You can switch the screen display by pressing the side button to see the total wattage for each port, as well as the voltage and current for each port.

To turn off the screen, press and hold the screen button for 2 seconds. To return to the previous interface before turning off the screen, simply press and hold the button briefly.

Please use a 5A current E-Marker charging cable to charge at 60W or above. When the E-marker cable is plugged in, it will be shown on the screen as depicted below.

If you have any questions or need further assistance, feel free to contact us.